SMA Torque Wrench

Model No. ATW-S01

  • Easy To Use
  • Cost Effective
  • STOCK Availability
 General Specifications
 Connector Type SMA
 Wrench Size 8.0 mm (5/16 in.)
 Preset Torque 0.92 Nm (8.1 in. lbs)
 Tolerance Accuracy +/-4%
 Calibrated per MIL-STD-45662

This handy torque wrench enables the proper installation or disassembly of coaxial SMA connectors.

Designed with a preset torque value, which when reached will "break" and move through a small arc about the pivot pin.

Supplied in a cardboard box as standard.

Option: Can be supplied in a wooden box for an additional charge.

Instructions for Use

  1. The preset torque 0.92 Nm (8.1 in. lbs) can only be achieved by using the wrench according to the force orientation as illustrated.
  2. Fit the wrench around the connector hex nut and apply force on the torque wrench using a smooth steady action. Caution: Do not apply force by holding any other part of the wrench other than the handle and do not use any other lever aid on the wrench.
  3. Do not apply force after the wrench "breaks" at the preset torque. If the connector is over torqued, loosen it and then repeat the operation.
  4. If the wrench has not been used recently, actuate it by clicking the wrench head back and forth several time before use. Clicking the wrench head back and forth spreads lubricant throughout the internal mechanism to improve performance.
  5. This is a precision instrument and should be handled with care, do not use as a hammer. If the wrench is accidentally dropped, it should be checked on a Torque Tester before using again.
T: +44 (0)1376 550220 F: +44 (0)1376 552145 E: sales@atlantecrf.com 40A Springwood Drive, Braintree, Essex CM7 2YN, England