PC Programmable Sources
ANS Series

  • 45 MHz to 2500 MHz
  • Directly PC Programmable
  • Turn-key Operation
  • Low Cost
  • Compact Size
  • Low Phase Noise
  • Wide Tuning Range, 1.5:1
  • Non-Volatile Memory
  • Buffered RF Output
  • Internal reference, 2ppm

The ANS series of programmable, synthesised RF signal sources offer a much lower cost alternative to multifunction test instruments and utilise the power of the standard office PC to provide a turn-key, plug & play solution to production and development testing of RF components and equipment. Directly connecting to the PC parallel port, each unit can be set to frequencies within a typical 1.5:1 range via an easy to use control panel software and the non-volatile memory enables the selected frequency to be retained in the stand alone unit. The Sources can be used in three output modes - continuous, momentary and toggle - also controlled by the PC control panel.

 Standard Specifications
 Output Impedance 50 ohms
 Operating Temperature 0+50C
 Control Interface TTL Compatible, Serial Data, External trigger
 Output Modes Continuous, Momentary, Toggle (on-off)
 Input Connector 9 pin D-Sub
 Output Connector SMA female to MIL-C-39012
 Size
 90 x 70 x 20mm

AM Model No Freq. Range MHz Freq.
Steps
KHz		 Freq.
Stability
ppm		 Output Power
(typ)
dBm		 Harm.
dBc		 Spur.
dBc		 Phase Noise Current
@+15V
d.c. mA
@1KHz
dBc/Hz		 @100KHz
dBc/Hz
ANS-456-656 45-65MHz 25 2 +7 -35 -60 -75 -105 200
ANS-656-956 65-95MHz 50 2 +7 -35 -60 -75 -105 200
ANS-806-127 80-120MHz 50 2 +7 -35 -60 -75 -105 200
ANS-167-227 160-220MHz 100 2 +7 -35 -60 -75 -105 200
ANS-227-327 220-320MHz 100 2 +7 -35 -60 -75 -105 200
ANS-158-208 1500-2000MHz 100 2 +7 -35 -60 -60 -90 200
ANS-178-228 1700-2200MHz 100 2 +7 -35 -60 -60 -90 200

Equipment Supplied as Standard:

  • Synthesised Source
  • Power Supply (Euro, UK or US style)
  • Control Software (Diskette)
  • Special Parallel Port Cable
  • Operating Manual
  • Spare DC Connector

PC Requirements:

  • IBM compatible 386 or higher PC
  • Running Windows 3.1 or higher
  • 4-8 MB RAM
  • 5MB Hard Disk Space
  • CD Rom
  • 640 x 480 Res. Monitor
  • 25 Pin, D-Sub, EPP or SPP Parallel Port

Custom Options:
01 External reference @ 10MHz
02 1ppm Internal Reference
03 Delete Power Supply
04 Base Plate 05 +10dBm 2dB Output
06 Custom Step Sizes
07 Custom Frequency Range
08 Custom Output Level

We reserve the right to change standard product specifications without notice but will be pleased to consider control drawings for quotation.
T: +44 (0)1376 550220 F: +44 (0)1376 552145 E: sales@atlantecrf.com 40A Springwood Drive, Braintree, Essex CM7 2YN, England