Certificate No. 3875

Phase Locked Oscillators External Ref. APL -
03 Series


  • 300 MHz to 14 GHz
  • Fundamental Frequency (CRO or DRO)
  • External Reference
  • Small Size
  • Low Phase Noise
  • Low Microphonics
  • Low Current
  • Custom Design

The APL - 03 series of fundamental frequency phase locked oscillators utilise coaxial resonators (CRO) to 3GHz and dielectric resonators (DRO) to 14 GHz in a phase locked loop for use with an external reference. Circuit design uses SMT devices including Si bipolar active devices up to 3 GHz and GaAs FET active devices above 3 GHz. The output contains a buffer amplifier for improved ruggedness, higher output power and a wider range of load VSWR. DRO types have an external tuning screw for factory set up only.

 General Specifications (also see options)
 Output Frequency 300 MHz to 14.0 GHz
 Reference Frequency
 25 - 200 MHz (see notes)
 Frequency Stability Reference dependent
 Output Power +13dBm min. (see options)
 Output Power Stability +/-2dB max
 Harmonics -20dBc max.
 Ref. Related Spurious -70dBc max.
 Other Spurious -80dBc max.
 Load VSWR 2.5:1 max.
 Input Voltage +15V d.c. (see options)
 Input Current 300mA max. (for +13dBm)
Operating Temperature 0+50C standard (see options)
 Storage Temperature -40+85C
 Lock Alarm TTL high for locked
 RF Output Connector SMA female
 Ref. Monitor Connector SMA female

Phase Noise (dBc/Hz) (typical)
Offset Frequency (Hz) Output Frequency (GHz)
0.6 1.5 3 4 10 14
100 Reference Dependent - See Notes
1K Reference Dependent - See Notes
10K Reference Dependent - See Notes
100K -135 -125 -115 -115 -110 -105
1M -140 -140 -135 -135 -120 -115

Options:
00 - Standard
Operating Temperature
01 - -10+60C
02 - -20+70C
03 - -40+85C
Output Power
11 - +16dBm min. up to 10 GHz
12 - +20dBm min. up to 6 GHz
D.C. Supply
21 - Input Voltage +12V d.c.
22- Regulated +11 to +16V
23 - +28V d.c.

Custom Options:

  • Higher Output Frequency to 30GHz (multiplied)
  • Higher Output Power to +30dBm (amplified)
  • Lower Harmonics (filtered)
  • Lock Alarm - Open Collector
  • Custom Sizes
  • Instrument or Rack Mount Housing with Power Supply

Model Numbers:
Examples:
APL-03-13.050-50-00 13.05GHz PLO with standard specifications and 50MHz ref.
APL-03-10.750-50-02-11-23 10.75GHz PLO with 50MHz ref., -20+70C, +16dBm and +28V


All dimensions are inches (mm)

We reserve the right to change standard product specifications without notice but will be pleased to consider control drawings for quotation.